Extra-compact double drive for smooth adjustment of seating and bedding furniture. Durable, efficient worm gear with high-performance self-locking function. Possible connection of an additional OKIMAT 300 or 2 single drives. Heating and vibration can be used.

  • Load capacity: max. 4000 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 3.5 mm/sec. *
  • Control unit: relay circuit
  • Connection options:
    connections for operating elements: 1
  • Equipment options: emergency lowering via 9 V battery on models with no mains cut-off, control unit integrated in housing, Hall sensor for external control


* depending on drive configuration at constant 24/29 V without load


Standard configurations

Performance data
Load capacity max. 4000 N on each side (for safety reasons, no pull force)
Adjustment speed 1 max. 3.5 mm/sec.
Stroke length back rest: 50 / 55 / 59 / 69 / 74 / 87 / 92 mm
leg rest: 55 / 69 / 74 / 87 / 92 mm
Fitting dimension installation length: 440 mm
component height: 162 mm
axle distance: 300 mm (+/- 2 mm)
axle diameter: 25 mm
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Control unit relay-free control
Motor voltage maintenance-free 24 V DC motor
Limit switch with micro switch
Housing colour black RAL 9005
Supply cable EURO-plug, black RAL 9017, with OKIN mains free isolation, straight, 3500 mm
EURO-plug, black RAL 9017, straight, 4000 mm
Transformer / Transformer type 50 VA
Further data
Connectivity 2 1-2 additional single drives or 1 further OKIMAT 300
1 handset or 1 remote control
Protection type IP20
Protection class II
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C
Power supply 100 V AC, 120 V AC, 230 V AC, 240 V AC

Extra configurations

Performance data
Control unit relay control
Position feedback Hall sensor for external control
Further data
Quick release /
Retracting function 3
emergency lowering via 9 V battery on models with no mains cut-off
Mains isolation yes
Equipment options control unit integrated in housing

1 depending on the drive configuration and the control components which are used
2 (example, depending on control unit type)
3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

DatasheetRequest 3D cad data: Please contact an office next to you

Note: Responsibility for OKIN products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which OKIN products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2014/30/EU and EC Guideline 2014/35/EU in terms of its conception and design as well as the version we have placed into circulation. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.