OKIMAT IPSe

The successor of the OKIMAT 3H4. More powerful, faster, cost-effective, and with many upgrade options. For easy tool-free fitting. Meets the eco-design directive (standby power consumption < 0.5 W).

  • Load capacity: max. 4500 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 5.5 mm/sec. *
  • Equipment options: emergency lowering via 9 V battery

 

* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data
Load capacity max. 4500 N on each side (for safety reasons, no pull force)
Adjustment speed 1 max. 5.5 mm/sec.
Stroke length back rest: 87 mm
leg rest: 69 mm
Fitting dimension installation length: 708 mm
component height: 120 mm
axle distance: 581 mm (+/- 2 mm)
axle diameter: 25 mm
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Control unit relay-free control
Motor voltage maintenance-free 24V DC motor
Input voltage 220-240 V AC 50-60 Hz
Components
Limit switch with micro switch
Housing colour black RAL 9005
Supply cable EURO-plug, black RAL 9017, straight, 2000 mm
SMPS integrated SMPS
Further data
Connectivity 2 1 handset
Protection type II
Protection class IP20
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C

Extra configurations

Performance data
Input voltage country-specific variants on demand
Further data
Quick release /
Retracting function 3
emergency lowering via 9 V battery
Equipment options Compatible with POWER PACK 1300

1 depending on the drive configuration and the control components which are used
2 (example, depending on control unit type)
3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Manuals
Ident No. Title Language Type  
78433 OKIMAT IPSe D Installation instruction  
78434 OKIMAT IPSe GB Installation instruction  
Flyer
Title Language  
OKIMAT IPSe GB  

DatasheetRequest 3D cad data: Please contact an office next to you

Note: Responsibility for OKIN products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which OKIN products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2004/108/EG and EC Guideline 2006/95/EG in terms of its conception and design as well as the version we have placed into circulation. Actuators are available in particular configurations on request and, after clarification, in versions according to the standards: EN60635 / EN60601-1 / norm UL, cUL. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.