UNOMAT

This single drive operating on the principle of double drives offers motorised back rest adjustment for slatted frames. Complies with the eco-design directive (standby power consumption < 0.5 W) with external SMPS.

  • Load capacity: max. 3500 N (for safety reasons, no pull force)
  • Adjustment speed: max. 4.2 mm/sec. *
  • Equipment options: connection possibility for a further UNOMAT

 

* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data
Load capacity max. 3500 N (for safety reasons, no pull force)
Adjustment speed 1 max. 4.2 mm/sec.
Stroke length back rest: 81 mm
Fitting dimension installation length: 351 mm
component height: 109 mm
axle diameter: 25 mm
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Control unit relay-free control
Motor voltage maintenance-free 24 V DC motors
Components
Limit switch with micro switch
Housing colour black RAL 9005
Transformer / Transformer type external SMPS
Further data
Connectivity 2 1 slave drive
1 handset or 1 handheld transmitter
Protection type IP20
Protection class II
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C

Extra configurations

Further data
Equipment options connection possibility for a further UNOMAT

1 depending on the drive configuration and the control components which are used
2 (example, depending on control unit type)

Manuals
Ident No. Title Language Type  
51411 UNOMAT D Installation instruction  
52204 UNOMAT GB Installation instruction  

DatasheetRequest 3D cad data: Please contact an office next to you

Note: Responsibility for OKIN products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which OKIN products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2004/108/EG and EC Guideline 2006/95/EG in terms of its conception and design as well as the version we have placed into circulation. Actuators are available in particular configurations on request and, after clarification, in versions according to the standards: EN60635 / EN60601-1 / norm UL, cUL. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.