ID 21

Elegant and convenient electric table height adjustment. The ID 21 system comes without cross bar and without visible function hole in the profile. In addition, the middle profile is entrained.

  • Load capacity: max. 800 N / 180 lbs push
  • Adjustment speed: max. 38 mm (1.49")/sec. with and without load *
  • Stroke length: 650 mm / 25.59"
  • 3-part rectangular steel column, 2-stage telescopic upwards, inner profiles move outwards


* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data
Load capacity max. 800 N / 180 lbs push
Adjustment speed 1 max. 38 mm (1.49") / sec. with and without load
Stroke length 650 mm / 25.59"
Fitting dimension 520 mm / 20.47"
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Motor voltage maintenance-free 24 V DC motor
Limit switch below: via microswitches
above: via virtual limit switches
Housing colour lifting column: outer/middle/inner profile: silver RAL 9006, black RAL 9005, white RAL 9016
Supply cable 1200 mm / 47.24", straight
Further data
Protection type IP20
Protection class III
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C

1 depending on the drive configuration and the control components which are used

Ident No. Title Language Type  
78437 System ID 21 D System instruction  
67999 ID 21 D Installation instruction  
78438 System ID 21 GB System instruction  
68000 ID 21 GB Installation instruction  
79465 Montage System ID 21 / assembly system ID 21 D / GB Installation instruction  

DatasheetRequest 3D cad data: Please contact an office next to you

Note: Responsibility for OKIN products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which OKIN products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2014/30/EU and EC Guideline 2014/35/EU in terms of its conception and design as well as the version we have placed into circulation. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.