GAMMADRIVE

Stable, tried-and-tested unit for powerful applications, e.g. for height, back and foot end adjustment on beds and armchairs. Extra-slim actuator housing for tight installation conditions.

  • Load capacity: max. 4000 N push / max. 3000 N pull
  • Adjustment speed: max. 44 mm/sec. *
  • Stroke length: max. 500 mm (+/- 1 mm)
  • Equipment options: stroke pipe clevis made of die cast zinc, Hall sensor

 

* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data
Load capacity max. 4000 N push
max. 3000 N pull
Adjustment speed 1 max. 44 mm/sec.
Stroke length max. 500 mm (+/- 1 mm)
Fitting dimension min. 175 mm + stroke (+/- 2 mm)
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Motor voltage maintenance-free 24 V DC motors
Components
Limit switch with micro switch
Stroke pipe clevis plastic
drill hole: 10 mm
recess: 5 mm
Gear clevis plastic
drill hole: 10 mm
recess: 5 mm
Stroke pipe aluminum untreated
Guidance profile aluminum untreated
Housing colour black RAL 9005
Motor connecting line black, straight, 300 mm
black, straight, 1000 mm
black, spiralled, 1500 mm
black, spiralled, 2500 mm
Further data
Protection type IP20
Protection class III
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C

Extra configurations

Components
Position feedback Hall sensor
Further data
Equipment options safety spindle nut with push but without pull function

1 depending on drive configuration at constant 24/29 V DC without load

Manuals
Ident No. Title Language Type  
80071 GAMMADRIVE D Installation instruction  
80072 GAMMADRIVE GB Installation instruction  

DatasheetRequest 3D cad data: Please contact an office next to you

Note: Responsibility for OKIN products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which OKIN products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2014/30/EU and EC Guideline 2014/35/EU in terms of its conception and design as well as the version we have placed into circulation. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.